Features
- Head of band saw moves left or right for angle cutting
- Built-in Protractor for fast and accurate selection of angles
- Stock remains in one position for all cuts
| Capacity (90° & 45°) | 13-1/2” Round at 90° 12” Pipe at 90° 19” Flat at 90° 12” H x 16” W Tube at 90° 13” Round at 45° 12” Pipe at 45° 13” Flat at 45° 12” H x 10” W at 45° |
| Blade Speeds (variable) | 60-190 FPM |
| Blade Size | 13’6” x 1” |
| Feed Control | Hydraulic Adjusting |
| Vise | Quick Adjusting Screw Type |
| Shut Off | Automatic |
| Motor – Standard | 2 H.P. 220 Volt Single Phase |
| Optional | 3 PH 220-440-460-480-575 |
| Shipping Weight | 1000 lbs. |
| Size | Table Height 29-1/2” Length 81” Width 39-1/4” Height 50” |
| Sealed Oil Bath Worm Gear | Standard |
| Removable Chip Tray | Standard |
| Table Back 7-1/4” | Standard |
| Construction | Heavy Steel; Welded & Machined for Accuracy & Durability |
*Specifications are subject to change without notice
| Accessories – 3000 | Part # |
|---|---|
| Air System | 5932 (230V) |
| Stock Gauge with Micro-Adjuster | 5750 |
| Single Stock Stand – 1 Roller | 6185 |
| Stock Stand – 5’ Long, 4-Rollers (20″ W) | 6227 |
| Pipe Clamp Attachment for Screw Vise | 6286 |
Accessories
Self Supporting Stock Stands
Stock Gauge with Micro-Adjuster
Pipe Clamp Attachment with Screw Type Vise
I own a small fabricating company and am looking to upgrade the equipment in my shop. I have used your products before and consider them to be the best.
I have used the Ellis 1800 since I started teaching in 03. My program just purchase a new one this year and the classes are loving it.
Have used Model 1800 in position in another company and found it the BEST bandsaw I have ever used. Our maintenance dept is now looking for a new general purpose bandsaw and I am championing your saw as far ahead of the nearest competition, no doubt the best bang for the buck!