Features
- Head of band saw moves left or right for angle cutting
- Built-in protractor for fast and accurate selection of angles
- One-step conversion from horizontal to vertical band saw
- Stock remains in one position for all cuts
- Portable-this band saw moves easily to the job site
| Capacity (90° & 45°) | 8” Round at 90° 8” Pipe at 90° 10” Flat at 90° 6” Round at 45° 5” Pipe at 45° 6” Flat at 45° |
| Blade Speeds (3) | 60-120-230 FPM |
| Blade Size | 8’6” x 1/2” x .032 |
| Feed Control | Hydraulic Adjusting |
| Vise | Quick Adjusting Camlock |
| Shut Off | Automatic |
| Motor | 3/4 H.P. 110/220 Volt Single Phase |
| Portable | 10” Wheels-Standard |
| Shipping Weight | 385 lbs. |
| Size | Table Height 27” Length 52” Width 23” Height 44” |
| Sealed Oil Bath Worm Gear | Standard |
| Removable Chip Tray | Standard |
| Construction | Heavy Steel; Welded & Machined for Accuracy & Durability |
*Specifications are subject to change without notice
| Accessories – 1100 + 1200 +1500 | Part # |
|---|---|
| Air System | 5922 (120V) 5932 (230V) |
| 2 Roller Support Stand with Stock Gauge and Micro-Adjuster | 6252 |
| Single Stock Stand – 1 Roller | 6185 |
| Stock Stand – 5’ Long (12″W) 4-Rollers | 6229 |
| Pipe Clamp Attachment for Camlock Vise | 6106 |
| Screw Type Vise | 6620 |
| Pipe Clamp Attachment for Screw Vise | 6286 |
| Vertical Table (10” x 16”) with Blade Guard | 9374 |
Accessories
Screw Type Vise
Pipe Clamp Attachment with Screw Type Vise
2 Roller Support Stand with Stock Gauge and Micro-Adjuster
Self Supporting Stock Stands
Vertical Table and Blade Guard
We just purchase your Mitre Saw 2000 and we are very pleased.
I have used the Ellis 1800 since I started teaching in 03. My program just purchase a new one this year and the classes are loving it.
I have the 9400 drill press, the 1600 saw and the belt grinder. I use these daily and am very satisfied. They are excellent products.