Features
- Head of band saw moves left or right for angle cutting
- Built-in protractor for fast and accurate selection of angles
- One-step conversion from horizontal to vertical band saw
- Stock remains in one position for all cuts
- Portable-this band saw moves easily to the job site
Capacity (90° & 45°) |
10” Round at 90° 8” Pipe at 90° 11” Flat at 90° 6-7/8” Round at 45° 6” Pipe at 45° 7-1/4” Flat at 45° 10” H x 8” W at 90° 8” H x 6” W at 45° |
Blade Speeds (3) | 55-115-230 FPM |
Blade Size | 10’0” x 1” |
Feed Control | Hydraulic Adjusting |
Vise | Quick Adjusting Camlock |
Shut Off | Automatic |
Motor – Standard | 1 H.P. 110/220 Volt Single Phase |
Optional | 3 PH 220-440-460-480-575 |
Portable | 10” Wheels-Standard |
Shipping Weight | 525 lbs. |
Size | Table Height 27” Length 59” Width 24-3/4” Height 47” |
Sealed Oil Bath Worm Gear | Standard |
Removable Chip Tray | Standard |
Construction | Heavy Steel; Welded & Machined for Accuracy & Durability |
*Specifications are subject to change without notice
Accessories – 1600 | Part # |
---|---|
Air System | 5922 (120V) 5932 (230V) |
2 Roller Support Stand with Stock Gauge and Micro-Adjuster |
6252 |
Single Stock Stand – 1 Roller | 6185 |
Stock Stand – 5’ Long (12″W) 4-Rollers” |
6229 |
Pipe Clamp Attachment for Camlock Vise |
6106 |
Screw Type Vise | 6620 |
Pipe Clamp Attachment for Screw Vise |
6286 |
Vertical Table (10” x 16”) with Blade Guard |
9374 |
Accessories
Screw Type Vise
Pipe Clamp Attachment with Screw Type Vise
2 Roller Support Stand with Stock Gauge and Micro-Adjuster
Self Supporting Stock Stands
Vertical Table and Blade Guard
In the last 6 weeks I have purchased a 1600 saw, 6000 belt grinder and a 9400 drill press, all of which I am VERY satisfied.
I have one of these saws (Model 1100) and I love it.
I have worked as a machinist and am very impressed with the Ellis line of saws.