Skip to content
Ellis 2000 Mitre Band Saw


  • Head of band saw moves left or right for angle cutting
  • Built-in Protractor for fast and accurate selection of angles
  • Stock remains in one position for all cuts
  • Mitres 60° both ways
(90° & 45°)
11” Round at 90°
10” Pipe at 90°
17” Flat at 90°
11” H x 13” W at 90°
11” Round at 45°
10” Pipe at 45°
11” Flat at 45°
9” H x 11” W at 45°
Capacity (60°)“6” W x 9” H  at 60°
6” Square at 60°
7” wide x 2” thick – Flat Stock at 60°
6” pipe (6-7/8” O.D.) at 60°
Blade Speeds (3)60-115-230 FPM
Blade Size12’0” x 1”
Feed ControlHydraulic Adjusting
ViseQuick Adjusting Camlock
Shut OffAutomatic
Motor – Standard1-1/2 H.P. 220 Volt Single Phase
Optional3 PH 220-440-460-480-575
Shipping Weight800 lbs.
SizeTable Height 28-1/8”
Length 72”
Width 38-1/4”
Height 47”
Sealed Oil Bath Worm GearStandard
Removable Chip TrayStandard
ConstructionHeavy Steel; Welded & Machined for Accuracy & Durability

*Specifications are subject to change without notice

Accessories – 2000Part #
Air System5922 (120V)
5932 (230V)
Stock Gauge with Micro-Adjuster5750
Single Stock Stand – 1 Roller6185
Stock Stand – 5’ Long, 4-Rollers
(20″ W)
Pipe Clamp Attachment
for Camlock Vise
Screw Type Vise6622
Pipe Clamp Attachment
for Screw Vise


Ellis Screw Vise Saw 3000 & 4000
Screw Type Vise
Ellis Pipe Clamp Attachment
Pipe Clamp Attachment with Screw Type Vise
Ellis Self Supporting Stock Stands
Self Supporting Stock Stands
5’ Guage Stop
Stock Gauge with Micro-Adjuster

I bought my machine used and in rough shape.  I am rebuilding and will put this machine in tip-top shape again.  Thanks for building a great machine.

Have used Model 1800 in position in another company and found it the  BEST bandsaw I have ever used. Our maintenance dept is now looking for a new general purpose bandsaw and I am championing your saw as far ahead of the nearest competition, no doubt the best bang for the buck!

I hear nothing but good things regarding your products.

Back To Top